Monitor 200

Moitor Series 8 inch 3-way Speaker system

M 200

Nominal Impedance: 4 Ohms

DC Resistance (Rdc) (Zmin): 3.1 Ohms

Sensitivity (2,83 V / 1m) : 88.5dB

Resonance Frequency (Fs) : 45dB

Frequency Response ( -6dB): 40Hz-5kHz

Voice Coil Diameter: 35mm

Qts: 0.45

Vas: 37.5 Litres

Effective Piston Area: 254.3cm2

R. Frequency Response: 45Hz - 3kHz

Crossover from (2-way filter 12dB/Oct.) : 2.2kHz

Power Handling, long term: 60 Watts

Power Handling, short term: 100 Watts

Total Weight: 1.86kg

Installing Depth: 61.5mm



The Larkmax Audio Moitor 8 inch 3-way speaker systems brings impressive performance to the car audio category. During our testing, these speakers delivered clear, powerful balance full range frequencies with minimal distortion even at higher volume levels. The high performance design makes these speakers suitable for both OEM or DSP amplifier system and high-powered systems.

The M200 - 8 inch midbass units use butyl rubber surround and long-fibre paper cone allow these speakers to delivers rich details and a full & mellow sound quality. These speakers excel with genres that feature prominent mid-bass elements like rock, country, and classical music. The tight, controlled sound makes them excellent candidates for three-way systems where they can focus exclusively on midbass duties. Installation proved straightforward with standard mounting dimensions, though at 58.5mm depth, you’ll install it on car doors and only need to ensure adequate clearance. The build quality feels substantial with a casting aluminium basket supporting the assembly.

The core of the M90S mid-range is a manually coated poly-glass fiber cone with light damping treatment, and mechanically matching suspension result in an unusually smooth Mid-range response. M90S compact size allows versatile and high-performance installations.

The tweeter M25 is a 25 mm Coating Silk-fabric dome tweeter.High efficiency annular acoustic lens and High energy neodymium magnet. Rear Chamber and damping material; controlling acoustic resonances insuring clear, high frequency tones.

 

Specifications

Power Handling - Peak: 120W

Power Handling - Continuous: 60W

Impedance: 4Ω

Frequency response: 45-23kHz

Sensitivity: 88.5dB SPL

Woofer size: 210 mm

Midrange size: 90mm

Tweeter size: 25 mm

Woofer magnet: High density flux ferrite

Tweeter & midrange unit magnet: Neodymium

Woofer cone: Water-repellent pressed paper

Midrange unit cone: manually coated poly-glass fiber cone

Tweeter dome: Silk-fabric

Crossover type: Tweeter Hi-Pass

Crossover cut off: 4 kHz @ 6 dB Oct.

 

M 200

Nominal Impedance: 4 Ohms

DC Resistance (Rdc) (Zmin): 3.1 Ohms

Sensitivity (2,83 V / 1m) : 88.5dB

Resonance Frequency (Fs) : 45dB

Frequency Response ( -6dB): 40Hz-5kHz

Voice Coil Diameter: 35mm

Qts: 0.45

Vas: 37.5 Litres

Effective Piston Area: 254.3cm2

R. Frequency Response: 45Hz - 3kHz

Crossover from (2-way filter 12dB/Oct.) : 2.2kHz

Power Handling, long term: 60 Watts

Power Handling, short term: 100 Watts

Total Weight: 1.86kg

Installing Depth: 58.5mm